spacer 2Telebyte Gfast Testing Guide 320

gfast map nov

Dark Green: Firm commitments from incumbent: BT (10M), Belgacom, Australian NBN, Swisscom,  Austria, Bezeq Israel, Chunghwa Taiwan, Telus Canada, Telekom South Africa, SK Korea, (U.S.) AT&T, Century, Frontier, Windstream, Belgium, Omantel

Mid Pink: Smaller carriers in Germany, Norway, Finland, Japan

Light Green: Incumbent likely:  France, Germany, Italy

Ryan Ding of Huawei is waiting for updated Broadcom firmware, which he expects before the end of the year. He will then be able to supply units for telco trials "in the first half of 2018."

Ding and everyone else are working diligently to get the DSLAMs ready to deploy in volume as soon as possible, I think late 2018 looks most likely. We won't know for sure until we have several months of tests.

Preliminary reports are that both the Sckipio and Broadcom chips are reaching 1.5 gig.

That makes sense as the spectrum used more than doubles. AT&T is seeing about 750 MHz with the 106 MHz chips The "gigabit" of the original G.fast announcement might be possible in lab tests, but it better to think of first generation speeds as 500-800. 

That's important to AT&T. CEO Randall Stephenson told Goldman Sachs, "We must have a gigabit." Comcast is on track to offer reliable gigabit cable to 40% of the U.S. by the end of next year. Today's cable standard, DOCSIS 3.1, is designed for a gigabit downstream. The upgrade is cheap enough that almost all cablecos will do it.

AT&T also wants the reverse power feature, which I understand is improved in the new chips. AT&T's first market is large buildings, where they can easily get a power connection. But they intend to go to smaller buildings from "distribution points" without power.

Salesmen are making many promises, but I'm skeptical until I have results from the field.

 

 

  

The Site for gfast 230
 

G.fast News

I’m still working through remarkable presentations from the Broadband Forum events. Michael Weissman, Bernd Hesse and team did a remarkable job choosing the speakers. http://bit.ly/BBFBASE

Deutsche Telecom: 35b Supervectoring Delayed to 2019 http://bit.ly/35blater
Broadcom is now over 3 years late. DT briefed German reporters after their financial call and revealed 35b was now delayed until 2019. 35b should deliver 200+ meg downloads 500-600 meters, a crucial tool for DT, which is losing share to cable. Cable now covers about 70% of Germany and is expanding. DT now only offers 50-100 megabit DSL while cable is often 400 megabits, going to a gigabit. 

The problem is software; the hardware is shipping and supposedly will work. DT says 35b is not ready to turn on. Broadcom in 2015 said 35b was in "production" in the press release below. Alcatel in early 2016 said to expect complete systems very soon. "35g is very similar to 17a so there should be little delay."

Broadcom's problems are leading major telcos and vendors to have a plan B, using Sckipio G.fast. DT itself is planning extensive G.fast deployments in 2019, mostly in apartment buildings. http://bit.ly/35blater

Gigabit 100 Meters - Unless the Wires are Lousy http://bit.ly/gflousy
Speeds are fine, "Unless there's a line problem." I've been reporting for three years that ~10% of lines have problems. In the chart by Rami Verbin of Sckipio, he finds G.fast goes ~130 meters on good lines. Poor lines have about half the reach. 

His chart roughly matches the reports from Swisscom, Belgacom, and England for both G.fast & vectored DSL. The 10% with problems can cause the majority of the line-related complaints to support. The angry customers drive up cost.

Rami's solution to reach the gigabit is bonding, supported on the Sckipio chips. Verbin made some additional points:

  • 4 gigabits is possible by bonding two decent 2 gigabit lines.
  • Even in a service from remote cabinets, ~25% are close enough to get a full gigabit."
  • cDTA and iDTA are practical ways to deliver much higher upstream by switching some bandwidth from downstream to upstream only when needed.
  • 35B will probably be similar but Deutsche Telecom doesn't expect to deploy until 2019. http://bit.ly/gflousy

AT&T Wants Coax 2-5 Gigabit G.fast. Very Soon. http://bit.ly/ATTCoax
AT&T faces intense competition from cable, talking about 10 gigabits in both directions. (Cable will only be 1 gig down, ~100 meg up, until ~2021.) AT&T wants something to brag about as well.

AT&T gained millions of lines of coax as part of the DirecTV deal. Alcatel and Huawei are leading the development of G.mgfast. That uses 424 MHz, full duplex, to achieve ~2.5 gigabits in both directions. The reach on telco twisted pair is only about 30 meters. On coax, those speeds can probably extend far enough to service most apartment buildings. Using 848 MHz, speeds can reach 5 gigabits. The ITU standards group has been aiming for 2019-2020 for G.mgfast, too slow for AT&T's marketers. David Titus wants a high-speed standard for coax "early in 2018." He believes that is "doable."http://bit.ly/ATTCoax

Read more ...