spacer 2Telebyte Gfast Testing Guide 320

gfast map nov

Dark Green: Firm commitments from incumbent: BT (10M), Belgacom, Australian NBN, Swisscom,  Austria, Bezeq Israel, Chunghwa Taiwan, Telus Canada, Telekom South Africa, SK Korea, (U.S.) AT&T, Century, Frontier, Windstream, Belgium, Omantel

Mid Pink: Smaller carriers in Germany, Norway, Finland, Japan

Light Green: Incumbent likely:  France, Germany, Italy

aries 2 pair bond12 bonded lines of 35b VDSL should be able to deliver 2 gig downstream ~400 meters. That's comparable to the most common G.fast backhaul, 2.4 gig GPON. Telcos are confident few will use the high speeds simultaneously so the high over-subscription is realistic. Upstream on the older DSLs is lower, so the upstream will probably be limited.

Kurt Raaflaub says Adtran has trial units at customers. As far as I know, this is the first public description of bonded 35b and I hadn't anticipated this possible use. Deutsche Telekom says 35b will be ready for deployment the second half of 2018.

Telcos will often have fiber within 500 meters of apartment buildings. They will almost always have a dozen unused pairs, especially as more customers drop landline voice. The G.fast basement DSLAM can then deliver a gig to anyone who wants it. 

AT&T CEO Stephenson sees the fiber they spent $billions on a few years ago as strategic. It was built to protect the business market, but Randall emphasizes the fiber is within a thousand feet of an enormous number of apartment buildings. Use the copper they already have for backhaul and put a DSLAM in the basement. If it works in the field as proposed, it will be a very cheap way to deliver a gigabit. 

In the right places, the saving in time and money should be large.

Raaflaub is speaking at Broadband Forum Access Summit

 Here's the blurb

Fiber to the Distribution Point Minus the Fiber

Re-using existing copper pairs for backhauling can dramatically reduce the cost and time to market for G.fast deployments. In this presentation, we discuss the results of our comprehensive studies on the requirements for G.fast backhauling capacity, and show that these can be realized over bonded copper in nearly all cases. We also prove that with the 2nd generation of G.fast chipsets along with new bonded 35b CPE chipsets it is actually becoming practical to enable Gigabit Services without the need for laying fiber at all. Positive results from customer lab trials round up this presentation.

11:20 - 11:35

Fiber to the Distribution Point Minus the Fiber

 

The Site for gfast 230
 

G.fast News

I’m still working through remarkable presentations from the Broadband Forum events. Michael Weissman, Bernd Hesse and team did a remarkable job choosing the speakers. http://bit.ly/BBFBASE

Deutsche Telecom: 35b Supervectoring Delayed to 2019 http://bit.ly/35blater
Broadcom is now over 3 years late. DT briefed German reporters after their financial call and revealed 35b was now delayed until 2019. 35b should deliver 200+ meg downloads 500-600 meters, a crucial tool for DT, which is losing share to cable. Cable now covers about 70% of Germany and is expanding. DT now only offers 50-100 megabit DSL while cable is often 400 megabits, going to a gigabit. 

The problem is software; the hardware is shipping and supposedly will work. DT says 35b is not ready to turn on. Broadcom in 2015 said 35b was in "production" in the press release below. Alcatel in early 2016 said to expect complete systems very soon. "35g is very similar to 17a so there should be little delay."

Broadcom's problems are leading major telcos and vendors to have a plan B, using Sckipio G.fast. DT itself is planning extensive G.fast deployments in 2019, mostly in apartment buildings. http://bit.ly/35blater

Gigabit 100 Meters - Unless the Wires are Lousy http://bit.ly/gflousy
Speeds are fine, "Unless there's a line problem." I've been reporting for three years that ~10% of lines have problems. In the chart by Rami Verbin of Sckipio, he finds G.fast goes ~130 meters on good lines. Poor lines have about half the reach. 

His chart roughly matches the reports from Swisscom, Belgacom, and England for both G.fast & vectored DSL. The 10% with problems can cause the majority of the line-related complaints to support. The angry customers drive up cost.

Rami's solution to reach the gigabit is bonding, supported on the Sckipio chips. Verbin made some additional points:

  • 4 gigabits is possible by bonding two decent 2 gigabit lines.
  • Even in a service from remote cabinets, ~25% are close enough to get a full gigabit."
  • cDTA and iDTA are practical ways to deliver much higher upstream by switching some bandwidth from downstream to upstream only when needed.
  • 35B will probably be similar but Deutsche Telecom doesn't expect to deploy until 2019. http://bit.ly/gflousy

AT&T Wants Coax 2-5 Gigabit G.fast. Very Soon. http://bit.ly/ATTCoax
AT&T faces intense competition from cable, talking about 10 gigabits in both directions. (Cable will only be 1 gig down, ~100 meg up, until ~2021.) AT&T wants something to brag about as well.

AT&T gained millions of lines of coax as part of the DirecTV deal. Alcatel and Huawei are leading the development of G.mgfast. That uses 424 MHz, full duplex, to achieve ~2.5 gigabits in both directions. The reach on telco twisted pair is only about 30 meters. On coax, those speeds can probably extend far enough to service most apartment buildings. Using 848 MHz, speeds can reach 5 gigabits. The ITU standards group has been aiming for 2019-2020 for G.mgfast, too slow for AT&T's marketers. David Titus wants a high-speed standard for coax "early in 2018." He believes that is "doable."http://bit.ly/ATTCoax

Read more ...